iCAM-Tower
Rapid deployment pole for remote video monitoring of construction sites and photovoltaic farms
- Fast deployment system that is that light it can be carried by the two persons or pallet jack.
- Retractable pole with cameras at a height of 4m or 5m.
- 4 cameras with 4Mpix (double HD) resolution with automatic human detection, with an efficiency of up to 97% – they do not react to false alarms, animals, vehicles and accidental traffic.
- A rotating PTZ camera with a very large zoom reaching 200m from the tower.
- Infrared night lighting working in complete darkness with a range of 30-50m around and 150m directionally with a PTZ camera.
- Local and remote video recording that allows to store the evidence from 30-90 days.
- Wireless video transmission (LTE / 4G / 3G / Wi-Fi) – smooth transmission from all cameras and recorder with the possibility of additional recording in the server room via the Internet.
- Alarms with SMS – a safe, steel structure protected by a number of tamper sensors, position changes and GPS with SMS notification.
- Motion detection in a 360° radius around and at least 6m from the tower with independent PIR sensors.
- Wireless motion detection up to 500m further via iWirelessPIR and radio tower notifications – after such detection, the PTZ camera will approach the area in which the motion has been detected, saving the entire event (NOTE: PTZ camera observation range is up to 646m, recognition 323m, identification 161m, license plate on almost the entire screen from 200m and event detection from a distance of 1613m).
- Audio loudspeaker for remote call or automatic warning message.
- LED lighting – automatically switching on in the event of alarm / tamper.
- Power source:
- Battery replaceable every 7-14 days (space for batteries: 2x 200Ah / 12V)
- Year-round solar power up to 600W
- From 230V AC (e.g. from an extension cord, aggregate) or from 12V DC (e.g. from a car, from batteries)
- Battery voltage measurement every 5 seconds, with SMS notification about the need to replace or recharge.
- Modular design for easy disassembly with the possibility of transporting a small delivery vehicle (separate battery compartment, mast, mast covers).
CDS-6IP 3PoE (New 2020)
Wireless system for IP cameras with 3 PoE ports and 63000k Bitrate
The latest wireless module for IP cameras is:
- 3 PoE+ ports they supply 3 IP cameras directly from the radio module
- 90W current efficiency with 48V/2A power supply
- 63Mbps bandwidth - the sum of the bitrates of all video streams
- 2km range radio LOS (with optical visibility of antennas)
- 16 IP cameras wirelessly - transmits streams from up to 16 IP cameras
- Radio Point-to-Point bridge. You will connect two CCTV installations using two radio units from the CDS-6IP family
- Point-to-Multipoint - with one receiver you will receive streams from up to eight transmitters
- Multiple power options - Each unit can be powered from:
- PoE switch (802.3at/af) and from a passive or active PoE power supply
- 48V DC and 12-24V DC
- iCAMSAT-OS without loss of image frames - HD and 4k image streams are a continuous transfer of huge amounts of images. Special video standards iCAMSAT-OS ensure the continuous transmission of HD images without loss of image frames.
- Very easy settings - you will start the system by setting only 2 parameters
- Compatible with any wireless module of the CDS-6IP family
Series: iCAM-MobileHD II
Rapid deployment cameras series with 4G/LTE and own battery that can be charged from any 230V lamppost.
- Lightning-fast implementation – cities video monitoring on any lamppost. An electrical connection like Christmas decorations.
- Remote observation of areas of investment – observation of construction sites and town investment areas.
- Great tool for municipal police – wireless monitoring of landfills, dangerous crossroads, helps to fight against vandalism.
- Safe mass events – the system will remotely observe any events in any location – distance to the central point of monitoring is not an issue.
- Lightweight, compact construction – professional HD video monitoring that works with any VMS, has its own battery, features 4G/LTE transmission, 5GHz, fast installation, and SMS notifications.
X-CAM II Switch PoE+ 4F (IP65)
Hermetic PoE switch for IP cameras - 4x PoE+, and optical fiber
- Switch PoE for CCTV cameras
- Resistant to harsh weather conditions ‒ due to IP65 tightness class and wide operating temperature range (from -20°C to 55°C).
- Compatible with any IP camera ‒ with 802.3at and 802.3af standards, it works even with big PTZ cameras with IR.
- Optical fiber and PoE ports - device with four PoE + ports and a universal SC type fiber optic connector
- Optical fiber bandwidth - optional, even up to 1Gb
- Large variety of power sources - available in many versions: directly from 100-230V AC, from 48V DC, and even from 12V DC.
- Comfortable and very quick installation ‒ thanks to cable tie fastenings directly to the pole or facade
- Modern shape and appearance - matching lanterns and modern structures
- Strong and efficient - 30W/Port
- X-CAM II Switch PoE 4F has identical parameters as the X-CAM II Switch PoE 4L model but has a Fiber SC port instead of LAN UpLink port.
X-CAM II Switch PoE+ 4L (IP65)
Hermetic PoE switch for IP cameras - 4x PoE+
- Switch PoE for CCTV cameras
- Resistant to harsh weather conditions ‒ due to IP65 tightness class and wide operating temperature range (from -20°C to 55°C).
- Compatible with any IP camera ‒ with 802.3at and 802.3af standards, it works even with big PTZ cameras with IR.
- Optical fiber and PoE ports – device with four PoE + ports and a universal SC type fiber optic connector
- Large variety of power sources – available in many versions: directly from 100-230V AC, from 48V DC, and even from 12V DC.
- Comfortable and very quick installation ‒ thanks to cable tie fastenings directly to the pole or facade
- Modern shape and appearance – matching lanterns and modern structures
- Strong and efficient – 30W/Port
X-CAM II Switch PoE+ 8L (IP65)
- Switch PoE for CCTV cameras
- Resistant to harsh weather conditions ‒ due to IP65 tightness class and wide operating temperature range (from -20°C to 55°C).
- Compatible with any IP camera ‒ with 802.3at and 802.3af standards, it works even with big PTZ cameras with IR.
- PoE ports - switch with 8 PoE ports.
- Large variety of power sources - available in many versions: directly from 100-230V AC, from 48V DC, and even from 12V DC.
- Comfortable and very quick installation - thanks to cable tie fastenings directly to the pole or facade.
- Modern shape and appearance - matching lanterns and modern structures.
- Strong and efficient - 30W/Port
CAM-Analog2.0
Set for wireless video transmission from analog CVI/TVI/AHD cameras up to 2Mpix
- Full HD for the price of PAL - we created CAM-Analog2.0 by adding FullHD to TCO-5807h
- TVI (TurboHD), CVI and AHD - compatible with every analog camera standard with a resolution of up to 2Mpix.
- Large wireless range - up to 500 meters of LOS video transmission range.
- 2 EU work channels working in the European 5.8 GHz band
- Additional 6 channels work available in other countries
- Analogue FM broadcast in real time
- Solid BNC video ports on the transmitter and receiver
- Waterproof design with IP66 protection
- Compatible with all analog cameras FullHD 2Mpix - 4in1, CVBS, AHD, CVI, TVI.
- Several sets on one installation - the possibility of running 2 sets side by side in Europe on 2 separate work channels
- One set transmits one video image, i.e. you need 3 CAM-Analog2.0 sets for 3 cameras
- CAM-Analog2.0 is a set containing transmitter and receiver
iCAM-Cage
Effective protection for CCTV systems against vandalism
- Protective cage for iCAM series cameras.
- Vandal-resistant constructionmade of galvanized steel.
- Quick, easy assembly, even without the help of professionals
iCAM-Magnetic STAND
Strong magnetic tripod for the car roof.
- Very strong magnetic tripod - is a very strong magnetic tripod, which allows mounting CCTV systems from the iCAM and iConstruction-CAM series on the roof of almost every car. With this functionality, mobile cameras can be used in any location requiring temporary observation.
- Very strong - magnets in rubber cover ensure stable assembly and work safety.
- Special magnets - will adapt automatically to any surface shape. The tripod is perfect for any type of vehicle with a steel body.
- Rapid installation on almost any car or steel surface. It may be mounted by one person efficiently.
- iCAM-Magnetic STAND for safety has been equipped with very strong magnets with adjustable pressure depending on the needs and current load. System can be used with very heavy PTZ cameras.