Added on date: 2016-06-27

PoER-24 power converter from PoE48V to PoE24V for IP transmitters  which converts the voltage of IP cameras from 48V to 24V. PoE24V connection is required for the majority of IP radio modules. When connecting to a power source Poer standard PoE48V (or from 35-48V DC) output to obtain IP cameras with live PoE48V + LAN and a second output voltage of PoE24V + LAN. PoER-24 significantly facilitates the supply of additional equipment such as IP radio modules from a common power source in IP cameras which are often PoE SWITCHES. Performance of converter at 15 W provides power to each radio module's IP CAMSAT eg. CDS-6IPeco, CDS-5IPmini, CDS-5IPmini/SMA. Miniature size allows easy installation inside each enclosure of IP cameras. In addition, the video signal from Ethernet LAN port of the camera is transmitted to the LAN port of the IP radio transmitter.



Designed to adjust power supply voltages for IP cameras (typically 48V PoE) to 24V for radio IP modules.


In the diagram below we present a way to supply the camera (48V) and a radio transmitter CDS-6IPeco (24V) using the adapter Poer-24.
In addition, the adapter Poer-24 sends data from the camera to IP transmitter.




NOTE: PoER-24h and PoER-24 are not Ethernet switches, but power converters from 48V to 24V. LAN signal is transparently passed to the LAN port "Camera" to the LAN port "Radioline". A typical switch PoE for 4 IP cameras and radio module device is X-CAMswitch.

Basic parameters

Urządzenia bezprzewodowe naszej firmy współpracują z markami:

AlhuaBosch hikvision