The new generation of iCAM
Stand By and energy saving
We’ve used innovative energy-saving methods to maximize work duration without any power source.
Special battery for working in freezing temperatures
A powerful, yet very light lithium battery used among others in military equipment works at temperatures from -20° to 70° and provides up to 5000 charging cycles with a decrease in efficiency of only 20%.
iCAM-PowerHD is used, among others, for for hidden observation from a distance of several hundred meters and precise PTZ control. The device is also protected against theft and damage thanks to the alarm and GPS systems, who will inform the user himself about the change of camera location or its movement. When the camera leaves the circle zone, e.g. 50m, it will cause a silent alarm as well as SMS and email notification with the current GPS position.
In addition, the system has a number of sensors informing about disassembly of the device and immediately transmits such information to the user.
Advanced analytics and SMS notifications
iCAM-PowerHD in CAM-OFF mode allows you to remotely turn off and turn on most camera blocks for any period, e.g. when monitoring in a given place is not needed – and you can do it without access the camera itself. You may control this feature by short SMS commands, sent from any mobile phone. Turning on the entire system and recording takes only a few seconds after sending an SMS.
Standby mode – watch for a few weeks
iCAM-PowerHD in StandBy mode allows the same functions as CAM-OFF but allows much greater saving of internal battery power. Turning on StandBy mode turns off as much as 99% of device blocks. The device cyclically switches itself on for a few seconds to check and receive control SMSs and then turns off again. This procedure continues until the camera receives an SMS about activating the system and launching the camera in 100% and its functionality. In this mode, the camera can watch for several dozen days and wait for the right time for video documentation.
AUTOMATIC NOTIFICATIONS ABOUT TRIGGERED ALARMS
- motion detection,
- intruder entry into a prohibited sector,
- detection of an unattended package,
- detection of big sound changes e.g. explosion, panic sounds, shots,
- recognition of the license plate that is on the wanted “blacklist”,
- discharge of the battery,
these are just some of the possibilities of iCAM systems
- unauthorized attempt to disassemble the camera,
- leaving the iCAM from the monitoring zone.
VIDEO MONITORING IN THE PLACES WITHOUT CCTV CAMERAS INSTALLED
The system enables trouble-free monitoring of illegal garbage dumps, observation from a long distance or concealment, monitoring of mass events, use of the City Guard car and special services, observation of rivers and water level, as well as flood and floodplains.
And all this in a few days, without projects and permits!
Below we are presenting only some features of iCAM-Power HD:
Built-in power supply for more than 3 days of continuous work plus exchangeable 64Ah batteries.
Additional external iCAM-Battery modules. The device uses the external batteries at first, then starts to use a built-in battery.
Two SIM cards that automatically choose the stronger signal.
Geolocation of camera, SMS/e-mail notification in case of unauthorized device removal.
Simple and fast installation, even without the help of specialists.