RAPID DEPLOYMENT CCTV TOWERS CCTV - iCAM-Tower PRO series
The most professional rapid deployment towers in Europe
iCAM-Tower PRO is an innovative monitoring tower that has been precisely designed to ensure the highest level of protection and safety during operation. Compared to other monitoring towers on the market, iCAM-Tower PRO emphasizes minimizing operating costs, reducing employee involvement, and eliminating the need for trips to the towers during operation.
A very important element of iCAM-Tower PRO is year-round solar power supply and a mobile controller that contains almost 100% of the tower’s electronics. In case of a failure or the need for replacement, there is no need for expensive transport of the tower, as only the controller can be shipped by a courier company. The entire mobile controller can be easily replaced with a new one or swapped between towers within a few minutes. Such a solution significantly reduces operating costs related to transport and employee travel over the course of several years.
iiCAM-Tower PRO has been designed to operate independently for many weeks. Thanks to year-round solar power supply with a capacity of up to 1.35kW, there is no need to connect it to an external power grid. This solution is not only environmentally friendly but also allows monitoring of locations where no power supply is available. The latest iCAM-OSD control with the option to display the most important tower and power supply parameters directly on the video screen in the form of text makes it easier to control and ensure constant supervision of the device. On the other hand, the special iCAM-ECO power-saving mode ensures monitoring of the tower even after the batteries are fully discharged.
iCAM-Tower PRO comes with intelligent cameras that recognize humans or vehicles, which allows for perimeter protection of the entire area without receiving false alarms. In addition, each tower is equipped with 3D position detection, GPS, and an alarm, which fully protects the tower itself.
Customers using iCAM-Tower PRO can rely on 24/7 technical support, providing additional security and ensuring smooth operation of the device. With all these features, iCAM-Tower PRO becomes an effective tool for monitoring and protecting facilities, paying for itself in less than 14 months.
iCAM-OSD - TOWER PARAMETERS ON THE VIDEO PICTURE
The most important parameters of the tower and power supply are displayed directly on the video screen in the form of text.
The latest version of the iCAM-Tower PRO allows for displaying the most important parameters of the tower directly on the camera image screen. This enables the operator to monitor the current status of the key operational parameters of the tower in real-time by observing the image from any two Hikvision, Dahua or Axis cameras. This is an extremely convenient solution as it enables immediate reaction to any problems or threats. Furthermore, all displayed parameters are recorded along with the image in the NVR.
The advanced iCAM-OSD PRO function is available in the latest version of the CAMSAT controller from the “PRO 2023” series.
YEAR-ROUND SOLAR-WIND POWER SUPPLY
TOWER THAT CAN BE FOLDED AND TRANSPORTED BY ONE PERSON
iCAM-ECO - ENERGY-SAVING OPERATING MODE
The latest tower controller from the PRO series informs the user, switches off appropriate blocks, and manages the power supply so that the tower always has enough energy.
The latest towers from the “PRO 2023” series are equipped with a special controller that automatically manages the power supply so that even in extreme conditions, the tower is not left unattended. Depending on the level of energy in the main batteries, the controller will disconnect the most demanding modules of the tower, leaving only the most important safety functions, such as live image and sound from one camera, recording from that camera from the last 14 days, 3D tower position protection with full alarm protection and notifications.
In the next power-saving mode, it will turn off everything except for the alarm system and notifications, ensuring that the tower is protected even in very extreme situations.
Each switching mode sends information to the user or operator in the SIA-IP or SMS standard. Of course, the operator has full control and decides remotely on the activation of the above functions and switching thresholds.
In addition to advanced power management, the controller displays all tower parameters directly on the camera image – the iCAM-OSD function.
The iCAM-ECO and iCAM-OSD functionalities are available optionally in all PRO series towers.
Rapid deployment CCTV tower on wheels.
Our rapid deployment with CCTV camera towers are solidly built, yet very easy to tow with a standard car, allowing for easy placement in practically any location, from remote areas to construction sites and city centers.
DAHUA CAMERAS, HIKVISION CAMERAS, AXIS OR BOSCH CAMERAS - YOU DECIDE
RAPID DEPLOYMENT CCTV TOWER EQUIPMENT
Always PRO as standard
SECURITY NOTIFICATION AND LIVE VIEW
Intuitive operation and full compatibility.
CAMSAT towers are equipped with the latest CCTV cameras from brands such as Hikvision, Dahua, Bosch, or Axis, as well as the Satel Integra alarm system. As a result, users have the ability to manage the tower using 100% compatible and original software from these companies.
Thanks to the integration of CAMSAT towers with these devices, users can be sure that their monitoring system is comprehensive and offers the highest reliability. In addition, the original software allows for convenient and effective tower management as well as integration with any Alarm Monitoring Center.
Live camera view
All images from the towers will be displayed live on your laptop, phone, or even on your TV. Free applications and programs are available for all devices and operating systems: Windows, Mac, iOS iPhone, and Android.
- On a phone with an application, e.g. Hik-Connect, iVMS-4500, DMSS
- On the computer:
- via a web browser,
- program iVMS-4200, Smart PSS,
- any VMS program for CCTV cameras, e.g. Milestone, Bosch VMS
- In the monitoring center with Safestar or Kronos system.
- On the TV using an internet receiver with an HDMI output.
Control like in a smart home
One of the most reliable applications for managing intelligent objects that we use in iCAM-Tower ensures full supervision and control from any place on Earth.
Manually or automatically:
- You can activate the tower and arm all 4 security zones.
- You can activate a megaphone with a warning message in English.
- You can activate white LED or green LED lighting.
- You can activate the police blue strobe deterrent.
- You can activate the iCAM-ECO energy-saving mode.
- You can remotely turn off part of the camera or other tower modules to save power.
- You will receive PUSH notifications about alarms and motion detection in the tower area.
- You will receive a PUSH about the latest <15% i <5% energy levels in the tower batteries
- You will receive information about motion detection in the cameras.
- You can activate monitoring and receive information about detection from iWirelessPIR wireless sensors.
The monitoring towers produced by CAMSAT are most commonly managed by the Satel Integra alarm systems and Hikvision or Dahua what guarantees 100% compatibility with any security system. The analytics from IP cameras, as well as all alarms, are sent live to the Security Agency and processed in their Alarm Monitoring system, for example Safestar or Kronos.