Modern construction sites, infrastructure projects, and protected areas require uninterrupted monitoring—even in locations without permanent access to electricity. The answer to these needs is the iCAM-DefenderTower PowerMAX, a fully autonomous mobile monitoring tower. By combining solar power with a generator, our system operates independently for many weeks—without the need for on-site servicing.
Solar power – the foundation of autonomous monitoring
The solar system used in the iCAM-DefenderTower PowerMAX is its primary power source. High-efficiency photovoltaic panels keep the monitoring system fully operational for most of the year (March–November), even in low sunlight conditions. Solar energy is converted and stored in batteries, which reliably power the tower at night as well. The entire system operates fully autonomously—requiring no maintenance or on-site charging.
Generator – intelligent backup only when needed
In the winter months or during extended periods without sunlight, an intelligent combustion generator automatically engages to replace solar power and ensure uninterrupted system operation. The generator starts automatically when the battery charge level drops below a set threshold. Importantly, it runs only when necessary, reducing fuel consumption. During operation, the generator consumes an average of 0.8 liters of fuel per hour, with a fuel tank capacity of up to 100 liters, depending on the client’s needs. It is designed to operate in extremely low temperatures—down to -30°C.
When weather conditions improve, the system switches back to solar power, and once the batteries reach the appropriate charge level, the generator shuts down automatically.
By combining solar and generator power, the system operates completely independently, with the operator notified only when fuel needs to be refilled—eliminating the need for constant supervision.
EFOY vs generator – which power source is more cost-effective?
Combustion generators are the second pillar of the independent power system for mobile towers, but an alternative has recently appeared on the market. Some mobile monitoring system operators are considering EFOY fuel cells—a methanol-based power source that operates quietly and without exhaust emissions. However, both the investment and operational costs of this alternative are significantly higher than those of CAMSAT’s hybrid power solution.
Below is a summary of the key differences between our solution and EFOY:
The CAMSAT solution is a more cost-effective and practical alternative—generator power supports the solar source only when truly necessary, making our mobile monitoring system a genuine hybrid. The iCAM-DefenderTower PowerMAX is a more practical and economical choice in operation, one that truly meets the needs of the mobile monitoring market.
What will the iCAM-DefenderTower do for you?
The CAM-DefenderTower PowerMAX is an advanced mobile monitoring tower with an automatic power system that operates completely independently—without the need for daily supervision.
Automated managment of power
- The system automatically monitors the battery charge level—requiring no action from the user.
- It decides on its own whether to use solar power or start the generator at any given moment—always in the most efficient and cost-effective way.
- It sends PUSH, SMS, or email notifications only when intervention is needed, e.g., refueling.
- It informs you of every change in power status (e.g., generator startup), ensuring complete operational transparency.
Full operational customization
- The user can independently set the “thresholds” for generator activation and the exact moments when notifications are sent.
- All parameters are configurable directly from the application—tailored to the individual conditions and requirements of each installation.
Advantage over traditional mobile monitoring systems
Unlike traditional mobile towers:
No need to regularly check battery charge levels.
No need to plan service visits or force remote restarts.
The system operates independently and notifies you only when it genuinely requires your attention.
This solution is designed to save your time and effort while maintaining full monitoring uptime.
The lack of constant supervision and site visits also reduces operational costs, eliminating expenses for travel and employee work hours.
Autonomous Power Supply for Harsh Conditions
A tower with an independent power supply is ideal for any location where there is no existing power infrastructure or where access to it is costly and complicated.
Industries that face such challenges include:
Construction – supervising project progress, securing equipment, and monitoring subcontractors.
Security companies – acting as a mobile monitoring point for temporary facilities, outdoor events, and high-risk areas.
Municipalities and local authorities – providing temporary surveillance of public spaces without the need for constant staff presence.
Agriculture and industry – protecting remote warehouses, machinery, and installations.
For these sectors, mobility is equally critical.
Thanks to complete independence from fixed power sources, our system is designed for work in the most demanding environments and for frequent relocation of monitoring points.
The hybrid power supply guarantees security and uninterrupted operation in locations where even a moment of downtime could have serious consequences.
Would you like to learn more about our solution?
Trust independence. Choose CAMSAT.
The iCAM-DefenderTower PowerMAX is a solution that eliminates power access issues and works perfectly as a mobile monitoring system. The combination of solar panels with a generator creates an autonomous, economical, and reliable system – ready to operate all year round without the need for daily servicing. Full independence and contextual notifications give the user the freedom to act and peace of mind regarding the continuity of site, facility, project, or asset monitoring. Our system prioritizes client comfort and savings in both time and finances while ensuring uninterrupted 24/7 surveillance. This maintenance-free solution provides the complete autonomy especially valued in the security and construction industries.
Stay up to date with our solutions for construction companies, security firms, and beyond.