RAPID DEPLOYMENT CCTV TOWERS CCTV - iCAM-Tower PRO series
The most professional rapid deployment towers in Europe
A very important element of iCAM-Tower PRO is year-round solar power supply and a mobile controller that contains almost 100% of the tower’s electronics. In case of a failure or the need for replacement, there is no need for expensive transport of the tower, as only the controller can be shipped by a courier company. The entire mobile controller can be easily replaced with a new one or swapped between towers within a few minutes. Such a solution significantly reduces operating costs related to transport and employee travel over the course of several years.
iiCAM-Tower PRO has been designed to operate independently for many weeks. Thanks to year-round solar power supply with a capacity of up to 2kW, there is no need to connect it to an external power grid. This solution is not only environmentally friendly but also allows monitoring of locations where no power supply is available. The latest iCAM-OSD control with the option to display the most important tower and power supply parameters directly on the video screen in the form of text makes it easier to control and ensure constant supervision of the device. On the other hand, the special iCAM-ECO power-saving mode ensures monitoring of the tower even after the batteries are fully discharged.
iCAM-Tower PRO comes with intelligent cameras that recognize humans or vehicles, which allows for perimeter protection of the entire area without receiving false alarms. In addition, each tower is equipped with 3D position detection, GPS, and an alarm, which fully protects the tower itself.
Customers using iCAM-Tower PRO can rely on 24/7 technical support, providing additional security and ensuring smooth operation of the device. With all these features, iCAM-Tower PRO becomes an effective tool for monitoring and protecting facilities, paying for itself in less than 14 months.
iCAM-OSD - TOWER PARAMETERS ON THE VIDEO PICTURE
The most important parameters of the tower and power supply are displayed directly on the video screen in the form of text.
The advanced iCAM-OSD PRO function is available in the latest version of the CAMSAT controller from the “PRO 2023” series.
YEAR-ROUND SOLAR-WIND POWER SUPPLY
2kW+0.4kW POWER
Three, very large panels with a power of almost 670W each, together with a wind turbine, ensure very fast battery charging in the winter.
DOUBLE EDGE PROTECTION
A 70-millimeter crush zone around each panel protects against the effects of collisions, such as those with construction vehicles.
GLASS PROTECT
The folding structure is closed with a special aluminum plate that protects the glass panels from stones kicked up by car wheels during transport.
TOWER THAT CAN BE FOLDED AND TRANSPORTED BY ONE PERSON
iCAM-ECO - ENERGY-SAVING OPERATING MODE
The latest tower controller from the PRO series informs the user, switches off appropriate blocks, and manages the power supply so that the tower always has enough energy.
In the next power-saving mode, it will turn off everything except for the alarm system and notifications, ensuring that the tower is protected even in very extreme situations.
Each switching mode sends information to the user or operator in the SIA-IP or SMS standard. Of course, the operator has full control and decides remotely on the activation of the above functions and switching thresholds.
In addition to advanced power management, the controller displays all tower parameters directly on the camera image – the iCAM-OSD function.
The iCAM-ECO and iCAM-OSD functionalities are available optionally in all PRO series towers.
Rapid deployment CCTV tower on wheels.
Our rapid deployment with CCTV camera towers are solidly built, yet very easy to tow with a standard car, allowing for easy placement in practically any location, from remote areas to construction sites and city centers.
Extra wide wheelbase
You don’t have to worry about the driver’s competence, we also thought about safety during transport with such a high structure. The wide wheelbase ensures safe transport even in very uneven terrain, at high speeds and with crosswinds.
Reinforced chassis
Rapid deployment towers equipped with four batteries weighing 68kg each, combined with driving on bumpy construction sites, require a solid and proven design. Our chassis are not trailers from a construction market, but specially designed and reinforced frames for maximum loads and with a GVWR of 750 kg.
Very stable and safe
Tower stabilizing supports, designed to support up to 4x 1300kg, provide durable and stable support for the tower in all weather conditions. In addition, the use of independent supports for solar systems significantly increases their stability and load capacity, allowing for safe and effective use of the entire structure in any terrain.
DAHUA CAMERAS, HIKVISION CAMERAS, AXIS OR BOSCH CAMERAS - YOU DECIDE
RAPID DEPLOYMENT CCTV TOWER EQUIPMENT
Always PRO as standard
Face, human, or vehicle recognition cameras.
Five cameras including a PTZ rotating camera with a range of 200m. All images are managed by artificial intelligence that detects the shape of a human and a vehicle. Motion detection in the monitored area is always confirmed by information about whether it is a human, vehicle, animal or other detection. If you have your own cameras, we will use in the tower what you propose or deliver to us.
Rapid deployment controller in CAMSAT towers
Have you ever calculated how much unplanned maintenance trips or transportation of a tower cost annually? All CAMSAT towers are equipped with a mobile controller that contains almost 100% of the electronics. In case of damage, you can send only the box by courier to the service or replace it with another tower in a few minutes. Anyone, even without technical knowledge, can do it. All cables are terminated with industrial connectors, properly numbered, and physically encoded to prevent mistakes.
SafeStar, Kronos. Dahua, Hikvision... 100% compatibility
CAMSAT towers are 100% compatible with the most popular Alarm Monitoring Stations in Europe. Communication protocols such as SIA-IP, Satel, Hikvision, Dahua, Bosch, or Axis ensure full compatibility with security company software.
Green LED lighting 2x 110W
Optionally, rapid deployment towers can be equipped with green LED lights. The appropriate wavelength of green light and high power of 2x 110W effectively and pleasantly illuminates the area around the tower. It is possible to install green lights on the tower with a power of: 110W, 200W, 240W, and 300W.
3D tower position detection
In addition to the alarm system, the tower is secured with a specially designed 3D position sensor. It monitors changes in position in three axes, so even a small rotation of the tower triggers an alarm and sends a notification to the alarm center. Additionally, GPS, shock sensor, and 4 PIR sensors securing the tower in the approach zone within a radius of 12m.
Blue strobe light of the POLICE type.
Deter instead of going to court and proving guilt. The blue strobe light will automatically turn on when approaching the tower or detecting intrusion and sabotage. The intense “Police” light significantly increases the attention of the surroundings more than a car alarm, making it the most effective.
SECURITY NOTIFICATION AND LIVE VIEW
Intuitive operation and full compatibility.
Thanks to the integration of CAMSAT towers with these devices, users can be sure that their monitoring system is comprehensive and offers the highest reliability. In addition, the original software allows for convenient and effective tower management as well as integration with any Alarm Monitoring Center.
Live camera view
All images from the towers will be displayed live on your laptop, phone, or even on your TV. Free applications and programs are available for all devices and operating systems: Windows, Mac, iOS iPhone, and Android.
- On a phone with an application, e.g. Hik-Connect, iVMS-4500, DMSS
- On the computer:
- via a web browser,
- program iVMS-4200, Smart PSS,
- any VMS program for CCTV cameras, e.g. Milestone, Bosch VMS
- In the monitoring center with Safestar or Kronos system.
- On the TV using an internet receiver with an HDMI output.
Control like in a smart home
One of the most reliable applications for managing intelligent objects that we use in iCAM-Tower ensures full supervision and control from any place on Earth.
Manually or automatically:
- You can activate the tower and arm all 4 security zones.
- You can activate a megaphone with a warning message in English.
- You can activate white LED or green LED lighting.
- You can activate the police blue strobe deterrent.
- You can activate the iCAM-ECO energy-saving mode.
- You can remotely turn off part of the camera or other tower modules to save power.
- You will receive PUSH notifications about alarms and motion detection in the tower area.
- You will receive a PUSH about the latest <15% i <5% energy levels in the tower batteries
- You will receive information about motion detection in the cameras.
- You can activate monitoring and receive information about detection from iWirelessPIR wireless sensors.
Security notification
The monitoring towers produced by CAMSAT are most commonly managed by the Satel Integra alarm systems and Hikvision or Dahua what guarantees 100% compatibility with any security system. The analytics from IP cameras, as well as all alarms, are sent live to the Security Agency and processed in their Alarm Monitoring system, for example Safestar or Kronos.
CAMSAT 24/7 Technical Support
Over 20 years of experience allows us to design devices that are highly intuitive, easy to use, and meet the most important functionalities in a given industry. We are at your disposal 24 hours a day, 7 days a week.
