Supported resolutions | 4k, UHD, HD 1080p, HD 720p, PAL/NTSC, others |
---|---|
Working radio band | CE: 5180-5350 MHz; 5470-5725 MHz |
Standard range (with integrated antennas) zintegrowanymi) | 1km |
LAN ports | 2 x RJ45 10 / 100 Base-TX |
Antenna | Built-in 13dBi MIMO, double polarization HV; H-60°, V-25° |
Transmission encoding | 64/128/152-bit WEP, WPA, WPA-PSK, WPA-2-PSK |
Tightness class | IP55 |
Power | 12V DC 1A and 12-24V PoE |
Power consumption | 11W |
Working temperature | from -20°C to 70°C |
iCAM-Receiver
Radio signal receiver from iCAM-MobileHD with LAN output
790,00 zł
- Radio signal receiver from the iCAM wireless system within 1 km of the camera.
- It allows you to connect the signal from mobile cameras to your own LAN and receive images on any computer or NVR with ONVIF.
- The set includes
- receiver with directional antenna and antenna output
- PoE power supply
- user’s manual
- declaration of conformity
You may also like…
iCAM-PowerHD
Special LTE mobile camera with its own battery power supply for 3 days
- Unlimited wireless range – with 4G/LTE technology.
- It does not even need power – the system is equipped with a powerful battery sufficient for 3 days of work with an HD camera.
- Operating parameters on the OSD camera screen - displays the most important parameters directly on the camera image, e.g. battery voltage and percentage, alarm and events, LTE signal strength,
- Quick and easy assembly even without the help of professional installers - the whole process involves inserting the camera into the quick mechanical slide-in socket, locking with a padlock and turning the key to turn on the power
- GPS location - notifying the operator about leaving the assembly area
iCAM-MiniHD II
Powerful remote video monitoring capabilities at a low price.
- Powered directly from 100-230V AC – access to 230V power supply is enough to create a professional monitoring point.
- 10 days of recording on the camera's SD card – additional local recording of images on SD cards in the IP camera itself; capacity and functionality depend on the IP camera used.
- Compact, lightweight construction – solid steel construction protecting electronics.
- Lightning-fast installation
iCAM-MiniHD II BACK
Fast deployment 4G / LTE unit with battery adapted for mounting any IP camera - it is enough to plug 230V
- Your IP camera + iCAM-Mini II BACK = fast deployment, compact, wireless point of video monitoring
- Any IP camera - the same CCTV system as iCAM-Mini II but does not contain an IP camera - yet, it is adapted to any IP camera of any manufacturer.
- Compact and lightweight construction - solid steel construction electronics that manages:
- battery,
- automatical charging and powering from 230V,
- 4G/LTE connection with 2 SIM cards,
- security and controls systems,
- displaying the most important parameters on the camera's image (OSD),
- "MASS EVENTS" option that provides smooth 4G/LTE transmission in the vicinity of thousands of mobile phones.
- 100% compatible - if your IP camera works with VMS/NVR then it will work identically with iCAM-Mini II BACK. Compatibility depends on the camera and VMS itself. iCAM is completely transparent and ensures 100% compatibility with any IP camera.
iCAM-PowerHD BACK
Fast deployment system - 100% wireless
- Compatible with any IP camera – among others with cameras of brands such as: Hikvision, Dahua, Bosch, Axis, Avigilon, UNV, Samsung.
- 128GB of memory – allows recording 7-10 days of videos.
- Equipped with a light battery - enough to work for three days; the possibility of extension to 6-9 days.
- Charger included in the set
Series: iCAM-MobileHD II
Rapid deployment cameras series with 4G/LTE and own battery that can be charged from any 230V lamppost.
- Lightning-fast implementation – cities video monitoring on any lamppost. An electrical connection like Christmas decorations.
- Remote observation of areas of investment – observation of construction sites and town investment areas.
- Great tool for municipal police – wireless monitoring of landfills, dangerous crossroads, helps to fight against vandalism.
- Safe mass events – the system will remotely observe any events in any location – distance to the central point of monitoring is not an issue.
- Lightweight, compact construction – professional HD video monitoring that works with any VMS, has its own battery, features 4G/LTE transmission, 5GHz, fast installation, and SMS notifications.
iCAM-MobileHD II BACK
Rapid deployment system without IP camera, charged from a 230V lantern
- Compatible with any IP camera – among others with cameras of brands such as Hikvision, Dahua, Bosch, Axis, Avigilon, UNV, Samsung.
- Vandal-resistant construction made from duralumin – protects the device against damage, and thanks to the IP66 protection class iCAM-Mobile II BACK is resistant to weather conditions.
- Internal video recording – storage of 30 days of recordings thanks to the built-in 1TB memory.
- Very fast implementation – video city monitoring on any street lighting lantern.
Related products
iCAM-Eagle’s
Video monitoring of any bird's nest
- iCAM-Eagle's is a system specially designed for completely wireless video monitoring of bird nests.
- The special, lightweight, adjustable camera arm allows mounting on almost any pole construction and adjusting the camera position to a specific nest.
- Very quiet rotary camera with zoom function - the camera's work is non-intrusive for birds, and allows accurate observation of the nest with deep close-ups.
- Video on any website, even for 10,000 viewers at a time.
simCAM – SIM card with LTE
A specialized SIM card for CCTV cameras without data limits and with a fixed IP address.
- Sim card without limits - no speed limits and the amount of data.
- Access from outside - e.g. remote camera handling identical to wired solutions.
- External services - allows you to launch external services, e.g. redirections
- Full internet access - with maximum LTE speed.
- Fixed ip address - allows simple and quick login in a web browser or live view application.
iCAM-Tower
Rapid deployment tower CCTV for remote video monitoring of construction sites and photovoltaic farms
- Fast deployment system that is that light it can be carried by the two persons, or pallet jack, or HDS.
- Retractable pole with cameras at a height of 4m or 5m.
- 4 AI cameras with 4Mpix (double HD) resolution with automatic human detection, with an efficiency of up to 97% – they do not react to false alarms, animals, vehicles, and accidental traffic.
- A rotating PTZ camera with a very large zoom reaching 200m from the tower.
- Infrared night lighting working in complete darkness with a range of 30-50m around and 150m directionally with a PTZ camera.
- Local and remote video recording that allows to store the evidence from 30-90 days.
- Wireless video transmission (LTE / 4G / 3G / Wi-Fi) – smooth transmission from all cameras and recorder with the possibility of additional recording in the server room via the Internet.
- Alarms with SMS – a safe, steel structure protected by a number of tamper sensors, position changes and GPS with SMS notification.
- Motion detection in a 360° radius around and at least 6m from the tower with independent PIR sensors.
- Wireless motion detection up to 500m further via iWirelessPIR and radio tower notifications – after such detection, the PTZ camera will approach the area in which the motion has been detected, saving the entire event (NOTE: PTZ camera observation range is up to 646m, recognition 323m, identification 161m, the license plate on almost the entire screen from 200m and event detection from a distance of 1613m).
- Audio loudspeaker for a remote call or automatic warning message.
- White LED lighting – automatically switching on in the event of alarm/tamper.
- Power source:
- Battery replaceable every 7-14 days (space for batteries: 3x 200Ah / 12V)
- Year-round solar power up to 1000W (1kW) and wind turbine (300W)
- From 230V AC (e.g. from an extension cord, aggregate) or from 12V DC (e.g. from a car, from batteries)
- Battery voltage measurement every 5 seconds, with SMS notification about the need to replace or recharge.
- Modular design for easy disassembly with the possibility of transporting a small delivery vehicle (separate battery compartment, mast, mast covers).
- For distributors – version "BACK" for mounting your own cameras and NVR.
CDS-6IP eco (v2020)
Wireless system monitoring for IP cameras HD and UHD 5,4-5,8 GHz
- 2 x LAN port
- Range 2km LOS
- 20-60M bitrate - total bitrate of all transmitted cameras - depends on the distance
- Powered from 12V making it compatible with standard CCTV power supplies and buffer power supplies with a battery.
- iCAMSAT-OS without frame loss – HD and 4K image streams are a continuous transfer of massive amounts of images. Special iCAMSAT-OS video protocols ensure the continuous transmission of HD images without loss of image frames.
- Double Antenna - built-in
- Easy configuration – the system requires only two parameters to be set up for a radio connection.
- Remote Preview - the device allows you to preview the signal and image on the screen of a smartphone or tablet.
- Compatible with each wireless module of the CDS-6IP family
- 16 video bridges on one installation - it is possible to run up to 16 radio bridges side by side on 16 separate work channels
- One video bridge transmits many images from multiple cameras, i.e. you need only two CDS-6IP eco units to handle 8 cameras with switch
- One receiver can be paired with up to 8 transmitters and you can connect several cameras to each transmitter.
- Transmission of 16 cameras with one radio bridge - number of cameras depends on the sum of their bitrate and on the radio distance. The CAMSAT calculator and diagrams will help you to select the devices.
CDS-Lift IP
Wireless CCTV system for monitoring elevators and cranes
- CCTV system with two inputs for IP cameras - each transmitter has two inputs for IP cameras; each input sends images from cameras with a resolution of up to 8 Mpix.
- Quick to install and easy to start - operating the transmitter requires no IT knowledge; just follow the instructions - select the operating mode and select the channel number.
- Resistant to interference and signal reflection - the use of digital radio technology ensures uninterrupted transmission even when the elevator is moving at high speed and transmission between numerous elevator cables.
iCAM-Battery
External battery supply system for CCTV cameras with PoE+
- Light, external 64Ah Li-Ion battery - a powerful and also very light lithium battery used among others in military equipment.
- Battery supply for every CCTV system with PoE+ - iCAM-Battery has a PoE+ port and works with PoE+ and Hi-PoE (50W) cameras from manufacturers such as Bosch, Axis, Hikvision, Avagilon, Dahua, UNV, Vivotec, Flir, Novus, Aper, and many others.
- Terminal port with 12V / 4A DC supply - it can be used for any electronic device.
iCAM-Magnetic STAND
Strong magnetic tripod for the car roof.
- Very strong magnetic tripod - is a very strong magnetic tripod, which allows mounting CCTV systems from the iCAM and iConstruction-CAM series on the roof of almost every car. With this functionality, mobile cameras can be used in any location requiring temporary observation.
- Very strong - magnets in rubber cover ensure stable assembly and work safety.
- Special magnets - will adapt automatically to any surface shape. The tripod is perfect for any type of vehicle with a steel body.
- Rapid installation on almost any car or steel surface. It may be mounted by one person efficiently.
- iCAM-Magnetic STAND for safety has been equipped with very strong magnets with adjustable pressure depending on the needs and current load. System can be used with very heavy PTZ cameras.
CDS-6IP/SMA
Wireless radio unit for IP cameras, with built-in antenna and RP-SMA port for external antennas.
- 2 LAN ports
- 2km range LOS with built-in antenna and up to 10km with external antenna
- Dual antennas built-in and RP-SMA connectors for external antennas
- 20-60M bitrate - total bitrate of all transmitted cameras - depends on the distance
- Powered from 12V making it compatible with standard CCTV power supplies and buffer power supplies with a battery.
- iCAMSAT-OS without frame loss – HD and 4K image streams are a continuous transfer of massive amounts of images. Special iCAMSAT-OS video protocols ensure continuous transmission of HD images without loss of image frames.
- Ease of configuration – the system requires only two parameters to be set up for a radio connection.
- Remove preview - the device allows you to preview the signal and image on the screen of a smartphone or tablet.
- Compatible with any unit from the CDS-6IP series.