iCAM-Battery
External battery supply system for CCTV cameras with PoE+
4 980,00 zł
- Light, external 64Ah Li-Ion battery – a powerful and also very light lithium battery used among others in military equipment.
- Battery supply for every CCTV system with PoE+ – iCAM-Battery has a PoE+ port and works with PoE+ and Hi-PoE (50W) cameras from manufacturers such as Bosch, Axis, Hikvision, Avagilon, Dahua, UNV, Vivotec, Flir, Novus, Aper, and many others.
- Terminal port with 12V / 4A DC supply – it can be used for any electronic device.
iCAM-Battery as an additional battery supply for iCAM-PowerHD and iCAM-MobileHD II
The additional battery supply module for fast deployment iCAM cameras. iCAM-Battery has a capacity of 64Ah and provides twice the operating time of the iCAM-PowerHD camera and up to three times with iCAM-MobileHD II CCTV systems. The device is adapted to outdoor usage and severe weather conditions, with a temperature range of -10°C – 55°C and IP66. It is equipped with a quick connector compatible with cameras, which means that mounting on a pole or facade takes only a few seconds.
iCAM-Battery is recommended for iCAM fast deployment cameras with higher power consumption, which can significantly extend the standard working time, e.g.: option of IR night vision lighting above 100-150m, very frequent use of PTZ and scanning functions, continuous LTE transmission in areas with weak GSM signal, etc.
An external, lightweight IP66 battery designed to power mobile camera systems from the series:
- iCAM-MobileHD II – increases battery life by 200% (from 24-32h)
- iCAM-PowerHD – increases battery life by 100% (from 48 -140h)
- iCAM-MiniHD – enables the battery power supply of the iCAM-MiniHD system for 24-72h of continuous operation
Supply of mobile cameras
200% longer work iCAM-MobileHD II
100% longer iCAM-PowerHD operation
Weather resistance
Thanks to the operating temperature from -10°C to 55°C and IP66 protection class.
Fast deployment slide-in socket
Compatible with iCAM CCTV systems
AC charger included
The 100-230V charger provides 100% charge in up to 9 hours.
Powering electronic devices
With a PoE + socket, 11-16V DC up to 50W.
Long-lasting battery
Over 5000 charging cycles with only a 20% decrease of efficiency.
| Charging from the lamppost | NO |
|---|---|
| Quick charging | 9h |
| Ports | 1. 1x RJ45 – LAN with PoE (50W) (external IP66 port); 2. 1 x RJ45 – LAN (internal); 3. Power: 12V DC (external socket) |
| Battery | 64AH (li-Ion) |
| Optional voltage | Option: 34V-48V DC |
| Working time | On battery power for 20W continuous load: 72h |
| Power and charging | Powering and charging from the desktop charger |
| Żywotność akumulatora | >5000 charging cycles |
| Tightness | IP66 |
| Dimensions | 248x297x140 [mm] |
| Weight | <9.5kg |
| Options | To increase working time, it is possible to cascade with another battery |
You may also like…
iCAM-MobileHD II BACK – remote surveillance camera
Rapid deployment system without IP camera, charged from a 230V lantern
- Compatible with any IP camera – among others with cameras of brands such as Hikvision, Dahua, Bosch, Axis, Avigilon, UNV, Samsung.
- Vandal-resistant construction made from duralumin – protects the device against damage, and thanks to the IP66 protection class iCAM-Mobile II BACK is resistant to weather conditions.
- Internal video recording – storage of 30 days of recordings thanks to the built-in 1TB memory.
- Very fast implementation – video city monitoring on any street lighting lantern.
iCAM-MiniHD II BACK
Fast deployment 4G / LTE unit with battery adapted for mounting any IP camera - it is enough to plug 230V
- Your IP camera + iCAM-Mini II BACK = fast deployment, compact, wireless point of video monitoring
- Any IP camera - the same CCTV system as iCAM-Mini II but does not contain an IP camera - yet, it is adapted to any IP camera of any manufacturer.
- Compact and lightweight construction - solid steel construction electronics that manages:
- battery,
- automatical charging and powering from 230V,
- 4G/LTE connection with 2 SIM cards,
- security and controls systems,
- displaying the most important parameters on the camera's image (OSD),
- "MASS EVENTS" option that provides smooth 4G/LTE transmission in the vicinity of thousands of mobile phones.
- 100% compatible - if your IP camera works with VMS/NVR then it will work identically with iCAM-Mini II BACK. Compatibility depends on the camera and VMS itself. iCAM is completely transparent and ensures 100% compatibility with any IP camera.
iCAM-PowerHD
Special LTE mobile camera with its own battery power supply for 3 days
- Unlimited wireless range – with 4G/LTE technology.
- It does not even need power – the system is equipped with a powerful battery sufficient for 3 days of work with an HD camera.
- Operating parameters on the OSD camera screen - displays the most important parameters directly on the camera image, e.g. battery voltage and percentage, alarm and events, LTE signal strength,
- Quick and easy assembly even without the help of professional installers - the whole process involves inserting the camera into the quick mechanical slide-in socket, locking with a padlock and turning the key to turn on the power
- GPS location - notifying the operator about leaving the assembly area
iConstruction-CAM Triplex (3x FullHD)
Remote supervising of construction site, from anywhere - observation within 270° with 30m IR
- LTE camera with limitless range – thanks to 4G/LTE technology it is possible to view a video online from anywhere, via the Internet.
- Smooth HD video – the system transmits a smooth HD video with minimal delay via 4G/LTE GSM.
- Livestreaming on a computer, smartphone, and TV in your office – you can watch a video from the cameras set up all over the country on any computer, smartphone, NVR recorder or HDMI receiver – iCAM-TVRec.
- Automatic images archiving – up to 10 days back, thanks to built-in memory.
iCAM-Battery230
24-hour power supply system for CCTV devices from the night road lighting installation. Without projects - from the street lamp.
- 24-hour power supply for CCTV cameras - as well as other electronic devices, using charging from road lighting installations.
- No projects - This eliminates the need for projects, which traditionally involve high costs and long implementation times.
- Very short charging time - less than 6 hours, which allows you to use the power of the twilight lamps even in the summer season (short lighthouse operation).
- All you need is a little electricity at night and iCAM-Battery230 will take care of your CCTV camera's energy for the rest of the day.
- Cascade charging option - e.g. for 40W cameras you can use 2 modules iCAM-Battery 230 connected in cascade
- Compatible with any cameras PoE IP or powered with 12V DC.
- Very fast installation process on any mast, streetlight or facade.
Related products
Series: iCAM-MobileHD II
A series of 4G/LTE mobile cameras with their own battery power, charged from any 230V street lamp
- Lightning-fast implementation – cities video monitoring on any lamppost. An electrical connection like Christmas decorations.
- Remote observation of areas of investment – observation of construction sites and town investment areas.
- Great tool for municipal police – wireless monitoring of landfills, dangerous crossroads, helps to fight against vandalism.
- Safe mass events – the system will remotely observe any events in any location – distance to the central point of monitoring is not an issue.
- Lightweight, compact construction – professional HD video monitoring that works with any VMS, has its own battery, features 4G/LTE transmission, 5GHz, fast installation, and SMS notifications.
iCAM-MiniHD II – mobile camera system
Powerful remote video monitoring capabilities at a low price.
- Powered directly from 100-230V AC – access to 230V power supply is enough to create a professional monitoring point.
- 10 days of recording on the camera's SD card – additional local recording of images on SD cards in the IP camera itself; capacity and functionality depend on the IP camera used.
- Compact, lightweight construction – solid steel construction protecting electronics.
- Lightning-fast installation
CAM-Analog2.0
Set for wireless video transmission from analog CVI/TVI/AHD cameras up to 2Mpix
- Full HD for the price of PAL - we created CAM-Analog2.0 by adding FullHD to TCO-5807h
- TVI (TurboHD), CVI and AHD - compatible with every analog camera standard with a resolution of up to 2Mpix.
- Large wireless range - up to 500 meters of LOS video transmission range.
- 2 EU work channels working in the European 5.8 GHz band
- Additional 6 channels work available in other countries
- Analogue FM broadcast in real time
- Solid BNC video ports on the transmitter and receiver
- Waterproof design with IP66 protection
- Compatible with all analog cameras FullHD 2Mpix - 4in1, CVBS, AHD, CVI, TVI.
IMPORTANT INFORMATION FOR CORRECT SELECTION OF THE DEVICES:
- Several sets on one installation - the possibility of running 2 sets side by side in Europe on 2 separate work channels
- One set transmits one video image, i.e. you need 3 CAM-Analog2.0 sets for 3 cameras
- CAM-Analog2.0 is a set containing transmitter and receiver
microCAM-4M
Miniature IP camera SONY STRAVIS 4Mpix with lens on the 8m cable, with Wi-Fi, H.265 compression, socket for 512GB SD card, I/O ports, Audio I/O, PoE
The microCAM-4M microcamera offers the following features and capabilities:
- Very small physical size, and high quality video
- SONY Starvis - 1/2,8” converter with progressive scanning
- High resolution: 2688x1520
- Three independent streams with H.265 and H.264 compression
- Starlight and true WDR
- SD card slot up to 512GB / 54 days of video recording - built-in Micro SD / SDHC / SDXC card slot, up to 512 GB
- Defog, ROI, motion detection
- H.265, H.265+, H.264, MJPG
- Privacy zones, camera obstruction detection
- Audio IN/OUT with 3,5mm (small Jack) port
- I/O - alarm input/output
- Powered from PoE and 12V DC
iCAM-Eagle’s
Video monitoring of any bird's nest
- iCAM-Eagle's is a system specially designed for completely wireless video monitoring of bird nests.
- The special, lightweight, adjustable camera arm allows mounting on almost any pole construction and adjusting the camera position to a specific nest.
- Very quiet rotary camera with zoom function - the camera's work is non-intrusive for birds, and allows accurate observation of the nest with deep close-ups.
- Video on any website, even for 10,000 viewers at a time.
iConstruction-CAM TRUCK II
Magnetic, wireless camera for construction cranes and heavy construction vehicles 4G/LTE
- 100% wireless - 4G/LTE transmission of HD 25fps video live to any place in the world
- WiFi - for configuring the device, and for local download of multiple recordings and simultaneously
- Very high video resolution 2560×1440pix - it's twice as HD
- 14 days