iCAM-PowerHD
Special LTE mobile camera with its own battery power supply for 3 days
- Unlimited wireless range – with 4G/LTE technology.
- It does not even need power – the system is equipped with a powerful battery sufficient for 3 days of work with an HD camera.
- Operating parameters on the OSD camera screen – displays the most important parameters directly on the camera image, e.g. battery voltage and percentage, alarm and events, LTE signal strength,
- Quick and easy assembly even without the help of professional installers – the whole process involves inserting the camera into the quick mechanical slide-in socket, locking with a padlock and turning the key to turn on the power
- GPS location – notifying the operator about leaving the assembly area
The new generation of iCAM
Stand By and energy saving
We’ve used innovative energy-saving methods to maximize work duration without any power source.
Special battery for working in freezing temperatures
A powerful, yet very light lithium battery used among others in military equipment works at temperatures from -20° to 70° and provides up to 5000 charging cycles with a decrease in efficiency of only 20%.
iCAM-PowerHD is used, among others, for for hidden observation from a distance of several hundred meters and precise PTZ control. The device is also protected against theft and damage thanks to the alarm and GPS systems, who will inform the user himself about the change of camera location or its movement. When the camera leaves the circle zone, e.g. 50m, it will cause a silent alarm as well as SMS and email notification with the current GPS position.
Built-in ALARM
In addition, the system has a number of sensors informing about disassembly of the device and immediately transmits such information to the user.
Advanced analytics and SMS notifications
iCAM-PowerHD in CAM-OFF mode allows you to remotely turn off and turn on most camera blocks for any period, e.g. when monitoring in a given place is not needed – and you can do it without access the camera itself. You may control this feature by short SMS commands, sent from any mobile phone. Turning on the entire system and recording takes only a few seconds after sending an SMS.
Standby mode – watch for a few weeks
iCAM-PowerHD in StandBy mode allows the same functions as CAM-OFF but allows much greater saving of internal battery power. Turning on StandBy mode turns off as much as 99% of device blocks. The device cyclically switches itself on for a few seconds to check and receive control SMSs and then turns off again. This procedure continues until the camera receives an SMS about activating the system and launching the camera in 100% and its functionality. In this mode, the camera can watch for several dozen days and wait for the right time for video documentation.
Completely wireless 4G connection
The system uses the latest technology to provide double 4G/LTE coverage using two SIM cards at once.
SMS alarms
Rapid deployment iCAM-PowerHD camera notifies about alarming events automatically.
Fast and simple installation process
It is enough to put a camera into special slide-in socket and lock it with the padlock.
Fast download of video records
You can access iCAM fast (100Mbps) to configure, control PTZ, view video live or check recordings archive.
Resistant to weather conditions
Working temperature -10°C ÷ 55°C, tightness IP66.
Compatible with any VMS
Precise PTZ controls from any laptop, smartphone or VMS/NVR.
AUTOMATIC NOTIFICATIONS ABOUT TRIGGERED ALARMS
- motion detection,
- intruder entry into a prohibited sector,
- detection of an unattended package,
- detection of big sound changes e.g. explosion, panic sounds, shots,
- recognition of the license plate that is on the wanted “blacklist”,
- discharge of the battery,
these are just some of the possibilities of iCAM systems
- unauthorized attempt to disassemble the camera,
- leaving the iCAM from the monitoring zone.
VIDEO MONITORING IN THE PLACES WITHOUT CCTV CAMERAS INSTALLED
The system enables trouble-free monitoring of illegal garbage dumps, observation from a long distance or concealment, monitoring of mass events, use of the City Guard car and special services, observation of rivers and water level, as well as flood and floodplains.
And all this in a few days, without projects and permits!
Below we are presenting only some features of iCAM-Power HD:
Built-in power supply for more than 3 days of continuous work plus exchangeable 64Ah batteries.
Additional external iCAM-Battery modules. The device uses the external batteries at first, then starts to use a built-in battery.
Two SIM cards that automatically choose the stronger signal.
Geolocation of camera, SMS/e-mail notification in case of unauthorized device removal.
Simple and fast installation, even without the help of specialists.
| Resolution | HD 1080p 25kl/s (option: up to 2k) |
|---|---|
| Internal video registration | 128MB |
| Video recording time | 10 days |
| Own internal power supply | Li-ION 64Ah battery up to 3 days of continuous work |
| External power supply | 12V and 24V DC; additional: iCAM-Battery and iCAM-Battery230 |
| Wireless connection | LTE 4G (option: Wi-Fi) |
| Wired connection | External LAN port |
| Notification about disassembly | YES (SMS / mail) |
| GPS | YES (option: SMS / mail notification about leaving the installation zone) |
| Working temperature | from -10°C to 55°C |
| Charging temperature | from 0°C to 55°C |
| Tightness | IP66 |
iCAM versions
ICAM EN
- Power supply
- Purpose
- Remote preview and remote recording
- Remote recording via the Internet
- Local recording
- Compatible with any IP camera
- Maximum number of connected cameras
- Displaying parameters on the sceen (OSD)
- GPS
- Powered from street lights
- Voltage
- Battery
- Standard battery life
- Pricelist index
iCAM-MobileHD II
Camera for a lightning lantern. Powered and automatically charged at night from a lighting lantern. During the day it works on the battery power (12-16h).
- Temporary power supply or power from street light is all you needPower supply
- Short- or long-term video monitoringPurpose
- YESRemote preview and remote recording
- YESRemote recording via the Internet
- YESLocal recording
- YESCompatible with any IP camera
- 4Maximum number of connected cameras
- YESDisplaying parameters on the sceen (OSD)
- OptionGPS
- YESPowered from street lights
- 100-230V AC, 12-24V DCVoltage
- 22AhBattery
- 12-16hStandard battery life
- 1070 - 1072Pricelist index
iCAM-MiniHD II
Suitable for installations with continuous power supply. Powered and automatically charged, with buffer backup battery for 4h of work.
- It needs continuous power supplyPower supply
- Long-term video monitoring installationsPurpose
- YESRemote preview and remote recording
- YESRemote recording via the Internet
- YESLocal recording
- YESCompatible with any IP camera
- 4Maximum number of connected cameras
- YESDisplaying parameters on the sceen (OSD)
- OptionGPS
- NOPowered from street lights
- 100-230V AC, 12-24V DCVoltage
- 18AhBattery
- 4-6hStandard battery life
- 1090 - 1095Pricelist index
iCAM-PowerHD
Special operational CCTV system with a light battery for 3 days of continuous work. Possibility to enlarge working time to 6-9 days.
- Doesn't even need external power supplyPower supply
- Short-term video monitoringPurpose
- YESRemote preview and remote recording
- YESRemote recording via the Internet
- YESLocal recording
- YESCompatible with any IP camera
- 4Maximum number of connected cameras
- YESDisplaying parameters on the sceen (OSD)
- OptionGPS
- NOPowered from street lights
- 12-24V DCVoltage
- 64AhBattery
- 72hStandard battery life
- 1080 - 1082Pricelist index
Movies
Installation of rapid deployment iCAM camera
City video monitoring without projects and permissions
You may also like…
Series: iCAM-MobileHD II
A series of 4G/LTE mobile cameras with their own battery power, charged from any 230V street lamp
- Lightning-fast implementation – cities video monitoring on any lamppost. An electrical connection like Christmas decorations.
- Remote observation of areas of investment – observation of construction sites and town investment areas.
- Great tool for municipal police – wireless monitoring of landfills, dangerous crossroads, helps to fight against vandalism.
- Safe mass events – the system will remotely observe any events in any location – distance to the central point of monitoring is not an issue.
- Lightweight, compact construction – professional HD video monitoring that works with any VMS, has its own battery, features 4G/LTE transmission, 5GHz, fast installation, and SMS notifications.
iCAM-MobileHD II BACK – remote surveillance camera
Rapid deployment system without IP camera, charged from a 230V lantern
- Compatible with any IP camera – among others with cameras of brands such as Hikvision, Dahua, Bosch, Axis, Avigilon, UNV, Samsung.
- Vandal-resistant construction made from duralumin – protects the device against damage, and thanks to the IP66 protection class iCAM-Mobile II BACK is resistant to weather conditions.
- Internal video recording – storage of 30 days of recordings thanks to the built-in 1TB memory.
- Very fast implementation – video city monitoring on any street lighting lantern.
iCAM-MiniHD II – mobile camera system
Powerful remote video monitoring capabilities at a low price.
- Powered directly from 100-230V AC – access to 230V power supply is enough to create a professional monitoring point.
- 10 days of recording on the camera's SD card – additional local recording of images on SD cards in the IP camera itself; capacity and functionality depend on the IP camera used.
- Compact, lightweight construction – solid steel construction protecting electronics.
- Lightning-fast installation
iCAM-MiniHD II BACK
Fast deployment 4G / LTE unit with battery adapted for mounting any IP camera - it is enough to plug 230V
- Your IP camera + iCAM-Mini II BACK = fast deployment, compact, wireless point of video monitoring
- Any IP camera - the same CCTV system as iCAM-Mini II but does not contain an IP camera - yet, it is adapted to any IP camera of any manufacturer.
- Compact and lightweight construction - solid steel construction electronics that manages:
- battery,
- automatical charging and powering from 230V,
- 4G/LTE connection with 2 SIM cards,
- security and controls systems,
- displaying the most important parameters on the camera's image (OSD),
- "MASS EVENTS" option that provides smooth 4G/LTE transmission in the vicinity of thousands of mobile phones.
- 100% compatible - if your IP camera works with VMS/NVR then it will work identically with iCAM-Mini II BACK. Compatibility depends on the camera and VMS itself. iCAM is completely transparent and ensures 100% compatibility with any IP camera.
iCAM-PowerHD BACK
Fast deployment system - 100% wireless
- Compatible with any IP camera – among others with cameras of brands such as: Hikvision, Dahua, Bosch, Axis, Avigilon, UNV, Samsung.
- 128GB of memory – allows recording 7-10 days of videos.
- Equipped with a light battery - enough to work for three days; the possibility of extension to 6-9 days.
- Charger included in the set
iCAM-Receiver
Radio signal receiver from iCAM-MobileHD with LAN output
- Radio signal receiver from the iCAM wireless system within 1 km of the camera.
- It allows you to connect the signal from mobile cameras to your own LAN and receive images on any computer or NVR with ONVIF.
- The set includes
- receiver with directional antenna and antenna output
- PoE power supply
- user's manual
- declaration of conformity
Related products
iCAM-Tower
Rapid deployment tower CCTV for remote video monitoring of construction sites and photovoltaic farms
- Fast deployment system that is that light it can be carried by the two persons, or pallet jack, or HDS.
- Retractable pole with cameras at a height of 4m or 5m.
- 4 AI cameras with 4Mpix (double HD) resolution with automatic human detection, with an efficiency of up to 97% – they do not react to false alarms, animals, vehicles, and accidental traffic.
- A rotating PTZ camera with a very large zoom reaching 200m from the tower.
- Infrared night lighting working in complete darkness with a range of 30-50m around and 150m directionally with a PTZ camera.
- Local and remote video recording that allows to store the evidence from 30-90 days.
- Wireless video transmission (LTE / 4G / 3G / Wi-Fi) – smooth transmission from all cameras and recorder with the possibility of additional recording in the server room via the Internet.
- Alarms with SMS – a safe, steel structure protected by a number of tamper sensors, position changes and GPS with SMS notification.
- Motion detection in a 360° radius around and at least 6m from the tower with independent PIR sensors.
- Wireless motion detection up to 500m further via iWirelessPIR and radio tower notifications – after such detection, the PTZ camera will approach the area in which the motion has been detected, saving the entire event (NOTE: PTZ camera observation range is up to 646m, recognition 323m, identification 161m, the license plate on almost the entire screen from 200m and event detection from a distance of 1613m).
- Audio loudspeaker for a remote call or automatic warning message.
- White LED lighting – automatically switching on in the event of alarm/tamper.
- Power source:
- Battery replaceable every 7-14 days (space for batteries: 3x 200Ah / 12V)
- Year-round solar power up to 1000W (1kW) and wind turbine (300W)
- From 230V AC (e.g. from an extension cord, aggregate) or from 12V DC (e.g. from a car, from batteries)
- Battery voltage measurement every 5 seconds, with SMS notification about the need to replace or recharge.
- Modular design for easy disassembly with the possibility of transporting a small delivery vehicle (separate battery compartment, mast, mast covers).
- For distributors – version "BACK" for mounting your own cameras and NVR.
CAM-Analog2.0
Set for wireless video transmission from analog CVI/TVI/AHD cameras up to 2Mpix
- Full HD for the price of PAL - we created CAM-Analog2.0 by adding FullHD to TCO-5807h
- TVI (TurboHD), CVI and AHD - compatible with every analog camera standard with a resolution of up to 2Mpix.
- Large wireless range - up to 500 meters of LOS video transmission range.
- 2 EU work channels working in the European 5.8 GHz band
- Additional 6 channels work available in other countries
- Analogue FM broadcast in real time
- Solid BNC video ports on the transmitter and receiver
- Waterproof design with IP66 protection
- Compatible with all analog cameras FullHD 2Mpix - 4in1, CVBS, AHD, CVI, TVI.
IMPORTANT INFORMATION FOR CORRECT SELECTION OF THE DEVICES:
- Several sets on one installation - the possibility of running 2 sets side by side in Europe on 2 separate work channels
- One set transmits one video image, i.e. you need 3 CAM-Analog2.0 sets for 3 cameras
- CAM-Analog2.0 is a set containing transmitter and receiver
iCAM-Battery230
24-hour power supply system for CCTV devices from the night road lighting installation. Without projects - from the street lamp.
- 24-hour power supply for CCTV cameras - as well as other electronic devices, using charging from road lighting installations.
- No projects - This eliminates the need for projects, which traditionally involve high costs and long implementation times.
- Very short charging time - less than 6 hours, which allows you to use the power of the twilight lamps even in the summer season (short lighthouse operation).
- All you need is a little electricity at night and iCAM-Battery230 will take care of your CCTV camera's energy for the rest of the day.
- Cascade charging option - e.g. for 40W cameras you can use 2 modules iCAM-Battery 230 connected in cascade
- Compatible with any cameras PoE IP or powered with 12V DC.
- Very fast installation process on any mast, streetlight or facade.
iCAM-Magnetic STAND
Strong magnetic tripod for the car roof.
- Very strong magnetic tripod - is a very strong magnetic tripod, which allows mounting CCTV systems from the iCAM and iConstruction-CAM series on the roof of almost every car. With this functionality, mobile cameras can be used in any location requiring temporary observation.
- Very strong - magnets in rubber cover ensure stable assembly and work safety.
- Special magnets - will adapt automatically to any surface shape. The tripod is perfect for any type of vehicle with a steel body.
- Rapid installation on almost any car or steel surface. It may be mounted by one person efficiently.
- iCAM-Magnetic STAND for safety has been equipped with very strong magnets with adjustable pressure depending on the needs and current load. System can be used with very heavy PTZ cameras.
iConstruction-CAM x15
Remote supervising of construction site from anywhere
- LTE camera with limitless range – thanks to 4G/LTE technology it is possible to view a video online from anywhere, via Internet
- Smooth HD video and a PTZ controls – the system transmits a smooth HD video and allows to control PTZ remotely with minimal delay via 4G/LTE GSM
- Livestreaming on a computer, smartphone, and TV in your office – you can watch a video from the cameras set up all over the country on any computer, smartphone, NVR recorder or HDMI receiver – iCAM-TVRec.
- Automatic images archiving – up to 10 days back, thanks to built-in memory
iConstruction-CAM TRUCK II
Magnetic, wireless camera for construction cranes and heavy construction vehicles 4G/LTE
- 100% wireless - 4G/LTE transmission of HD 25fps video live to any place in the world
- WiFi - for configuring the device, and for local download of multiple recordings and simultaneously
- Very high video resolution 2560×1440pix - it's twice as HD
- 14 days of recording in the camera and possibility to use any recorder from CCTV cameras via the Internet, e.g. in the office, in the server room
- 16 IP cameras wirelessly - transmits signals from up to 16 IP cameras
- 12V and 24V power supply with protection against deep battery discharge in the vehicle
- Optional magnetic mounts - very strong magnets for "sticking" the camera to any steel surface
- Very strong construction and IP66
- Optional batteries magnet mounted or bolted to the vehicle
- EXAMPLES OF INSTALLATIONS:
- to the crane hook
- to the container
- on the roof or on the side of the vehicle
- to the arm of the excavator
- on the crane...
- SECURE:
- employees and immediate surroundings
- against fuel theft and devastation
- live view of the work progress
- monitors work time and report vehicle engine off/on (via email / SMS)
- at night, park other construction vehicles around, and monitor them all
- protects the rear of semi-trailers...
iConstruction-CAM Truck
iConstruction-CAM Truck is a specialized kit adapted for mounting on construction vehicles
- High-quality video in HD 1080p resolution.
- Video recording up to 10 days back thanks to the built-in 128GB memory.
- Adapted to work in difficult conditions - effortless operation when mounted on cranes, overhead cranes and other construction machinery and vehicles due to vibration and interference resistance.
- Resistant to harsh weather conditions - working temperature from -20°C to 55°C with IP66 protection class.
GlobalCAM-LTE PoE
Wireless transmitter for IP cameras with unlimited coverage and no optical visibility (NLOS).
- Transmitter for three IP cameras – wireless, with almost unlimited range.
- Transparent transmission – all signals from IP cameras via the GSM LTE.
- Video recording – using any network recorder NVR.
- Online image archive - as well as full access to the archive of the connected DVR/NVR - from anywhere in the world.
