Our mobile towers are equipped with exceptionally strong supports with a load capacity of up to 1350 kg each, allowing the entire structure to be lifted so that the tires are raised at least 50 mm off the ground. This not only protects the tires from degradation when the tower remains in one place, but it also ensures 100% safety for you and your workers.

Our wide wheelbase design ensures stability and secure transport, even on uneven terrain, at high speeds, and in strong side winds.

Our mobile towers, equipped with four 68 kg batteries each, are designed for the toughest conditions. Each chassis, far from standard solutions found in building supply stores, is specially reinforced for maximum loads and a GVW of 750 kg. Perfect solidity, even on the most demanding construction sites.

Five cameras, including a PTZ camera with a range of 200m. All images are managed by artificial intelligence, which detects the shape of a human and the shape of a vehicle. Motion detection in the monitored area is always confirmed with information whether it is a human, vehicle, animals, or other detections. If you have your own cameras, we will use what you propose or provide in the tower.

Have you ever calculated how much annual service trips or unplanned tower transport cost? All CAMSAT towers are equipped with a mobile controller containing nearly 100% of the electronics. In case of damage, you send only the box to the service by courier or replace it with another tower in a few minutes. This can be done by anyone, even without technical knowledge. All cables are terminated with industrial connectors, appropriately numbered, and physically coded to prevent mistakes.

CAMSAT towers are fully compatible with the most popular Alarm Monitoring Stations in Europe. Communication protocols such as SIA-IP, Satel, Hikvision, Dahua, Bosch, and Axis ensure complete compatibility with any security company software. In addition to receiving alerts from the built-in alarm system, you can also read information from the NVR input ports. These ports can be connected to devices like PIR sensors and door contacts, which will be displayed in your company’s Alarm Center.

Optionally, mobile towers can be equipped with green LED illuminators. The appropriate wavelength of green light and the high power of 2x 110W effectively and pleasantly illuminate the area around the tower. The tower can be equipped with green illuminators with the following power options: 110W, 200W, 240W, and 300W.

In addition to the alarm system, the tower is secured with a specially designed 3D position sensor. It monitors changes in position along three axes, so even a slight rotation of the tower triggers the alarm and sends a notification to the alarm center. Additionally, the tower is equipped with GPS, a shock sensor, and 4 PIR sensors that secure the tower in the approach zone within a 12-meter radius.

Deter intruders instead of going to court and proving guilt. The blue strobe light activates automatically when someone approaches the tower or detects a break-in or sabotage. The intense “Police-like” light draws much more attention than a car alarm, making it highly effective in preventing incidents.