Continuous transmission with high bitrate.
To start the device, only what you need to do is choosing a working channel and work mode: transmitted or receiver. The rest of the settings are automatically configured with an encoding of the transmission.
CDS-EasyIP eco works on 16 independent wireless channels including four free European channels (CE). The possibility of using four transmitters for one receiver provides the use of up to 64 IP cameras on one installation (16 cameras in the EU).
A very important parameter in high-definition image transmission is the continuity of transmission with high transmission speed. The CDS-EasyIP eco system with the VIDEO BRIDGE protocol guarantees priority multimedia transmission of video, PTZ control, audio and control data. Subsequently, the priorities send so-called Internet data.
CDS-EasyIP eco transmits the video and PTZ controls with a speed of 57Mbps over a distance of 3km and a distance of up to 1km gets 95.6Mbps. At such short distances, you can send streams from up to 12 Full HD cameras. In the case of a lower distance, you can use even more cameras. When choosing a wireless system, remember to take into account the possible frequency occupation at the given object and the fact that the video transmission must be continuous at a constant speed.
Ease of use
It is enough to set only 2 necessary parameters (IP address and channel number) to get a radio connection.
iCAMSAT-OS without frame loss
Special iCAMSAT-OS video protocols ensure continuous transmission of HD images without loss of image frames.
High resolution
CDS-EasyIP eco supports cameras with very high resolutions up to UltraHD or 12Mpix.
Two LAN ports for IP cameras
Every “CDS-EasyIP eco” has 2 LAN ports for connecting two IP cameras without an additional switch.
Another version of the device with the symbol “CDS-EasyIP” also has two LAN ports but one of the ports is in PoE standard. This allows to power the IP camera directly from the transmitter.
4 transmitters to 1 receiver
CDS-EasyIP eco works on 16 independent wireless channels, including four free European channels (CE).
Built-in internal antenna
Working angle 30°, range up to 3000 meters.
RELIABLE AND EASY TO USE
- 100% image transmission over a distance of 2500 meters.
- Quick installation and easy configuration without a computer.
- Up to 12 cameras with one connection.
- Power supply directly from a switch or PoE NVR.
ECONOMIC SOLUTION FOR CCTV INSTALLATION
CDS-EasyIP eco supports up to two IP cameras with very high resolutions of 10-12Mpix, in the range of 2500-3000 meters.
Powered from 48V PoE
Resolution support: PAL, HD, UHD, 4k
Range 3000m
16 working channels, including 4 CE
CCTV CALCULATOR
Selection of wireless antennas for IP cameras - calculator of camera range and bitrate
In order to quickly select wireless transmitters for IP cameras, we have prepared an application that calculates the required number of radio units in a given CCTV installation.
Use the radio equipment calculator to choose the right number of wireless devices for IP cameras.
Speeds and range recommended for 100% transmission, including interference in the 5GHz band:
• 68M bitrate – 500m,
• 60M Bitrate – 1000m,
• 50M Bitrate – 1500m,
• 40M Bitrate – 2000m,
• 30M Bitrate – 2500m,
• 12M Bitrate – 3000m.
