Special system with protocols for HD and 4K video transmission
Innovative control with micro DIP switches, intuitive operation and the highest bitrate performance – that’s CDS-EasyIP PoE
Innovative wireless system for IP cameras that does not require a computer to configure and launch. Very easy to launch a system of transmitters and receivers, designed for installers starting to work with IP cameras. Launching requires only selecting the operating channel with DIPswitch and selecting the transmitter/receiver option. The rest of settings are configured automatically with transmission coding.
CDS-EasyIP is not a computer device for internet transmission but a wireless video transmitter for continuous and uninterrupted transmission of high-quality video images.
The implemented special audio/video protocols ensure transmission of all HD and 4K picture frames with a slight transmission delay.
In addition to the simultaneous transmission of many images and sounds, it also allows PTZ cameras control and data transmission between the recorder and cameras.
The system transparently transmits the signal from IP cameras regardless of the IP address in the cameras or recorder. To fully launch the CDS-EasyIP radio link, you do not need to set many complicated parameters unlike using other IP systems.
CDS-EasyIP works on 16 independent wireless channels including four free European channels (CE). The possibility of using four transmitters for one receiver provides the use of up to 64 IP cameras on one installation (16 cameras in the EU).
CDS-EasyIP does not need a web panel to login. The most important parameters are set by switches on the front panel of the device.
INSTALLATION COMFORT, EXTREMELY UNIVERSAL
Since we released you from the time-consuming configuration of IP devices, you can fully focus on other, more important matters. It all depends on you – now you have
time for that.
Remember that CDS-EasyIP PoE is
- Two inputs for IP cameras, including one with PoE
- A power supply included in the set will also power the 15W IP camera
- Compatible with any IP camera up to 16Pix
- Used in installations with high radio interference and in large areas
- Great for novice installers in IP – installation requires no technical knowledge
- Transparent – send everything in both directions on IP networks – the IP address family and the protocol used are irrelevant
- The best ratio of price and labor time.
HIGH QUALITY VIDEO FOR EVERYONE
Image transmission from cameras with a resolution of up to 4k using special audio/video protocols ensuring low signal delay. Quick installation and easy DIP switch configuration make this model suitable for beginner installers.
Below we are presenting only some features of CDS-EasyIP:
Powered from 48V PoE
resolution support: PAL, HD, UHD, 4k
Range 2500m
16 working channels, including 4 CE
CCTV CALCULATOR
Selection of wireless antennas for IP cameras - calculator of camera range and bitrate
In order to quickly select wireless video transmitters for IP cameras, we have prepared an application that calculates the required number of radio units in a given CCTV installation.
Use the radio equipment calculator to choose the right number of wireless devices for IP cameras.
Speeds and range recommended for 100% transmission, including interference in the 5GHz band:
• 68M bitrate – 500m,
• 60M Bitrate – 1000m,
• 50M Bitrate – 1500m,
• 40M Bitrate – 2000m,
• 30M Bitrate – 2500m,
• 12M Bitrate – 3000m.